[ICOM] IC-7300

[mtm746 at aol.com]

Ok Bob,  thanks,, I wanted  to make sure that the transmit tone had the treble and bass to select so I can run a decent mic on the radio.. Thanks, Mark W2YM 73's.



-----Original Message-----
From: Bob Burns W9BU <w9bu_lists at rlburns.net>
To: 'ICOM Reflector' <icom at mailman.qth.net>
Sent: Thu, Mar 31, 2016 9:58 pm
Subject: Re: [ICOM] IC-7300

Are you asking about receive audio tone or transmit audio tone?

As has been posted many times in this group, the user manual is available
for download.

On page 12-3 of the most recent "CD-ROM" manual, you will find the Tone
Control settings. These settings are access through the Set Mode.

For each voice mode (SSB, AM, and FM) in receive, you can select either High
and Low Pass filters or you can select Bass and Treble adjustments.

For each data mode (CW and RTTY) in receive, you can select High and Low
Pass filters.

For each voice mode (SSB, AM, and FM) in transmit, you can select Bass and
Treble adjustments. Additionally, in SSB, you have three choices of
selectable transmit bandwidth with the low end selectable as 100, 200, 300,
or 500 Hz and the high end selectable as 2500, 2700, 2800, or 2900 Hz.

Bob...


> -----Original Message-----
> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Mark via
> Icom
> Sent: Thursday, March 31, 2016 12:33 PM
> To: icom at mailman.qth.net
> Cc: mtm746 at aol.com
> Subject: Re: [ICOM] IC-7300
> 
> Can someone tell me if the IC-7300 has treble and bass controls for audio?
> Thanks, Mark W2YM 73's.

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html