[ICOM] Icom Mics, HT, Speaker, and many accessories FS

[Ken, W8EK]

Icom and related items For Sale --
Microphones, 2 meter HT, Speaker / Phone Patch,
Power Cable, Many HT Accessories including batteries,
Original Boxes, Cable, Speaker Microphones, Communications
Speakers, Manuals, and other Miscellaneous Items


ICOM HM-133 V Remote Control DTMF Microphone:

This mic has a DTMF Touch Tone pad on it, but also offers
full remote control including VFO select, Up-Down tuning
and memory select. It also has keypad back lighting. It
has an 8 pin modular plug and is used with the IC-2100,
IC-2200, IC-2300, IC-2725, IC-V8000, and others.

This one appears to be new, unused, still in its original
plastic bag.

With paper work for $40.


Icom HM-36 Hand Microphone "Made in Japan":

The Icom HM-36 is used on most of the Icom HF rigs. It has
a round 8 pin plug, making it compatible with almost any of
the Icom rigs with this connector. This includes the IC-746
and 756 series, IC-718, IC-7600, IC-7200, IC-775, plus many
more, including VHF rigs like the IC-28, IC-229, IC-3200
and many others.

It also has up / down buttons on the top for changing the frequency.

This one works 100% and appears to be new. It is still in its original
box, and marked "Made in Japan". $35


Several Speaker Microphones:

All of these speaker mics have the 3.5 mm and 2.5 mm two
conductor plugs that are spaced about 3/8 inch apart, and
are molded into a single connector. They are used on Icom,
Yaesu, Radio Shack, Maxon, Ritron, Vertex and many other
radios.

Premier SPM-100
It is a lightweight and compact unit, featuring a powerful
speaker as well as a high-quality condenser-style microphone
element that produces excellent transmitted audio clarity.
The microphone may be secured to the user's lapel or shoulder.
It also features a built-in 3.5mm jack for using an external
earphone. $18

DM-100
Appears to be the same as the SPM-100 above, but just with
a different label. $18


IC-2 SRA, 2 meter HT and accessories:

IC-2 SRA, with belt clip, wrist strap, BOTH rubber ducks (the
regular 2 meter BNC one, and the special 440 MHz receive one),
pocket guides ("cheat sheets"), W & W Assoc 12 Volt 600 mahr
NiCad battery, 12 V 1 amp wall wart, and manual.

The above HT looks good, and works great if powered thru the top
of the HT.  It does not power up from battery, even with new
batteries.  It must be something very minor.   $75

W & W 7.2 Volt 2500 NiMH battery for IC-2 SRA, new, not used, $40

Batteries America, BP-83 H, 7.2 V, 1100 mahr NiMH battery for
IC-2 SRA, new, not used, $30

Additional W & W 12 Volt 600 mahr NiCad, condition unknown, $5

Icom BC-72 desk charger, $30

Buy ALL of the above for $150.


Icom Speaker / Phone Patch

Although a phone patch is included, this is also a very nice speaker 
with Icom styling.

This one works fine and looks great.  $65


Communications Speakers:

Realistic 21-549 A
This speaker is about 4 inches square and about 2 inches
deep. It is rated for 5 watts, has an 8 ohm impedance, and
is listed as a 300 to 3000 Hz frequency response, making it
ideal for communications. It has a 3.5 mm (1/8 inch) mono
plug, as used by most modern rigs. Gimbal mount included.
It is black in color, looks great, and sounds great. $12

Vanco SPB-5
Appears to be the same at above, but with a Vanco label.
Also includes gimbal mount. $12

Vanco SPB-6
Similar to SPB-5 above, but is considered a noise
cancelling speaker. 10 Watt rating. Still in original
box, new. $18


DC Power Cable

This is the heavy duty power cable as used on most of
the Icom HF rigs, plus also many Kenwood, Alinco, and others.
It has the 6 pin molex connector, with four pins used - two
for plus and two for ground.  The cable may not have ever
been used. It looks good, and of course works fine. $22


Extra mobile mounting bracket for IC-28 (or any rig needing a
5 1/2 inch wide bracket) $15


Accessories for Icom IC-2A, 3A, 4A, 02 A, etc. series of HTs:

Icom CP-1 DC cord
This cord will work with the DC-1, as a charge cord, plus many
other items needing the 2.1 mm coaxial power plug.  The opposite
end has a cigarette lighter plug on it.  $10

Belt Clip for the above HTs.
Complete with hardware. $6


Batteries for Icom IC-2 AT series of HTs:

These items can be used on the IC-2 A, 3 A, 4 A, 02 A,
03 A, 04A, 2G AT, 32 AT series HTs plus many others.

Icom BC-25 U wall charger
Standard wall charger for most of these HTs. $15

Icom BP-5 Heavy duty battery pack
For rebuilding only. Battery is dead. $5


Original Boxes for Icom IC-27 mobiles and IC-V8 HT:

The box for the IC-27 includes the two internal
styrofoam inserts that holds the rig, the cardboard
box for accessories that also acts as a spacer,
and even includes the original plastic bag for
the rig.
It is in nice condition. $8

Original box for Icom IC-V8 HT
Complete with insert. Looks like new. $8


Icom Battery Charger:

Icom BC-127 A, Battery Charger for Icom IC-Q7A Dual Band HT:
This charger charges two AA NiCads (or NiMH) for the
IC-Q7 A Dual band HT, and Icom R-2 receiver, and probably
others.
This appears to be new, unused, still in its bag.
Icom lists them at $21. Buy this one for $12.


Icom BC-25 / Santec HT Charger
Same thing, with slightly different tags. 2.1 mm coaxial power plug
output, with center +. 12 V DC at 50 ma. Still in box, unused. $15


Antennas for your HT:

All rubber ducks are for 2 meters, are in good
condition, and are $10 each, unless stated otherwise.

BNC - As used on most HTs, 7 inches long

BNC - Original Alinco EA0024, about 4 inches long

BNC - Original from Kenwood TH-215, about 5 inches long

BNC - "Stubby" about 4 1/2 inches long

Type F connector - 6.5 inches long

BNC Stubby for 440 MHz, 3 inches long

Threaded (as used by Motorola, etc.) stubby for 440 MHz

Not a Rubber Duck, but can be used on your HT:
Telescoping Antenna w/ BNC about 19 inches long
can be used as a quarter wave antenna on 2 m,
or on 220, or 450 MHz if telescoped shorter. $12


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom manuals
and are not copies. All are in very good condition.
These are original Icom manuals only.

SPECIAL:
Buy two, three, or four manuals and take 10% off.
Buy five or more and take 20% off.

Mobile transceiver and HT manuals:
IC-2 AT, 2 meter HT, still in plastic bag, $6
IC-22 A, 2 m FM transceiver, $10
IC-22 S, 2 m FM transceiver, $12
IC-27 A/E, 2 m transceiver, still in plastic bag, $15
IC-27 H, 2 m FM transceiver, $12
IC-28 H, 2 m FM transceiver, $12
IC-290 H, 2 m FM transceiver, still in plastic bag, $15
IC-751, HF transceiver, still in plastic bag, $22
IC-820 H, good copy, not original $10
IC-3200 A/E, Dual Band FM Transceiver, $15
IC-V8, 2 meter HT, $6

Other Icom manuals:
BC-30 Desk Charger, $4
BC-35 Desk Charger, $5
BP-2, BP-3, BP-4, BP-5 battery packs, $3
BP-21, BP-22, BP-23, and BP-24 Batteries, $3
DC-1 DC pack for IC-2 AT series HTs, $4
EX-310 Voice Synthesizer, $5
HM-8 Hand Microphone, w/schematic, $5
HM-10 scanning microphone, $3
IC-3 PA Power supply / speaker, $10
MB-5 mobile bracket, $2
MB-65 mobile bracket mount, $2
RC-10 Frequency controller, $4
SM-5 desk microphone, $3
UT-16 Voice Synthesizer, $5

These are original Icom manuals only.


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs,
HF and VHF/UHF antennas, HF linear amplifiers, and many
other accessories.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400