[ICOM] 765 Power Delay update

[Marc & Tricia Niebergall]

Glad to be of help.

73,
Marc
On May 1, 2015 5:26 AM, "rrocket88 at netzero.net" <rrocket88 at netzero.net>
wrote:

> Thanks Marc, congrats on the repair.
>
> Randy K4IMZ
>
> ---------- Original Message ----------
> From: "Marc & Tricia Niebergall" <mtniebs at gmail.com>
> To: ICOM Reflector <icom at mailman.qth.net>
> Subject: Re: [ICOM] 765 Power Delay update
> Date: Fri, 1 May 2015 05:04:20 -0700
>
> Randy,
>
> Eric had a few left over.  Don't know how many.  That is the only source I
> am aware of. His call is K2CB.
>
> Marc
>
> On Fri, May 1, 2015 at 3:22 AM, rrocket88 at netzero.net <
> rrocket88 at netzero.net
> > wrote:
>
> > Marc, thank you for the information , is there a source for the IC-1 or
> > was it just a part Eric had in stock ?
> > Thanks  de Randy K4IMZ
> >
> > ---------- Original Message ----------
> > From: "Marc & Tricia Niebergall" <mtniebs at gmail.com>
> > To: ICOM Reflector <icom at mailman.qth.net>
> > Subject: [ICOM] 765 Power Delay update
> > Date: Thu, 30 Apr 2015 16:10:35 -0700
> >
> > Thanks to all the contributors who helped to solve this minor annoyance.
> It
> > is now working as advertised thanks to Gary, who pointed me in the
> > direction of the Photo Interrupter IC-1, and Eric, who supplied me with
> the
> > part. In the process of troubleshooting, I chose to change all the
> > electrolytics, and while not solving the problem, it did bring the power
> > supply up to date with some new parts.  The rig seemed to show signs of
> > improvement with the installation of the new electroytics, but there
> > remained and occasional pause after the rig had cooled down for a spell.
> So
> > the last part I installed was IC-1 and it instantly powered on from a
> cold
> > start.  The actual delay designed into the rig is for a delay of only a
> few
> > milliseconds.  It works like a champ now.
> >
> > Hope this information will provide some help to others experiencing a
> > similar problem with their IC-765 or 761 or any Icom rig with similar
> power
> > supply design.
> >
> > Cheers,
> > Marc-k7wxk
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>