[ICOM] IC02AT Question

[Dave Edwards]

So the keypad is likely ok.
Double check the button pushing for setting up a frequency.
Not setting up a memory channel, just to make it work in VFO mode.
http://www.download.n7tgb.net/Icom_Manuals/IC-02A_AT_E.pdf

...Dave


On 1/16/15 11:31 AM, bcarling at cfl.rr.com wrote:
> Yes they all make tones OK.
>
> On 16 Jan 2015 at 11:18, Dave Edwards wrote:
>
>> If you are suspecting something with the 6 button....
>> Transmit, and press 1,2,3,4 etc.
>> You will hear the touch tone sounds.
>> Does 6 create a tone?
>> If not....like someone else said....keypad may be shot.
>>
>> Oh, and YOU have the Knight T-60....I have the 2NT!
>> So, you are Mr. Knight T-60 hi hi
>>
>> ....Dave
>>
>>
>> On 1/16/15 10:55 AM, bcarling at cfl.rr.com wrote:
>>> Thank you Dave (Mr. Kinght T-60!!)
>>>
>>> No that's not it. I tried 146.94 and tried -600
>>> Failed.
>>>
>>> I can't even program the off-set amount to 600 kHz
>>>
>>> FUNC-7 doesn't work. The 6 key won't do its thing.
>>> Pretty sure it needs a CPU reset.
>>>
>>> Bry AF4K
>>>
>>>
>>> On 16 Jan 2015 at 10:42, Dave Edwards wrote:
>>>
>>>> Hey Bry...Dave here (from SKCC...recent T60-2NT QSO).
>>>> Anyway....Try programming first on a standard frequency...like a minus
>>>> offset on 146.70 receive frequency.
>>>> Yes...it would not allow you to program offsets that would take you out
>>>> of the band, and quite possibly....would not let you program offsets
>>>> that were not used back then ...but are now. That is why you should
>>>> first see if you can make it work on 31-91, or 34-94.
>>>> I have two or three of them myself.
>>>> ...Dave
>>>>
>>>>
>>>>
>>>> On 1/16/15 7:53 AM, bcarling at cfl.rr.com wrote:
>>>>> By the way, I bought the antenna for this new on eBay for $5 including shipping, and about
>>>>> $15 or $20 for a battery pack. Not bad... now if I can just program the offsets!
>>>>>
>>>>> On 16 Jan 2015 at 7:12, bcarling at cfl.rr.com wrote:
>>>>>
>>>>>> Hi folks - I don't seem to be able to get the +600  /  -600 selection to activate on my old
>>>>>> IC02AT.
>>>>>>
>>>>>> Is there some restriction for some of the settings that I am missing here?
>>>>>>
>>>>>> Bry AF4K
>>>>>>
>>>>>>
>>>>>> ----
>>>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>> ----
>>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>>
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>