[ICOM] IC02AT Question

[bruce at sultantronics.com]

I think the HT's with low serial numbers you could only program the offsets
in the first couple of memories. In later year HT's I think this restriction
was removed.

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of
bcarling at cfl.rr.com
Sent: Friday, January 16, 2015 4:54 AM
To: icom at mailman.qth.net
Subject: Re: [ICOM] IC02AT Question

By the way, I bought the antenna for this new on eBay for $5 including
shipping, and about 
$15 or $20 for a battery pack. Not bad... now if I can just program the
offsets!

On 16 Jan 2015 at 7:12, bcarling at cfl.rr.com wrote:

> Hi folks - I don't seem to be able to get the +600  /  -600 selection to
activate on my old 
> IC02AT.
> 
> Is there some restriction for some of the settings that I am missing here?
> 
> Bry AF4K
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html