[ICOM] IC-765 tuner and total loss of RF from tuner circuit

[Mark via Icom]

Call Jim at Burghardt Radio Repair 605-886-7314.   I bet he will be able to 
fix it for you.   He is real good repairing  Icom radio's.   Mark W2YM 73's.
 
 
In a message dated 1/2/2015 4:13:32 P.M. Eastern Standard Time,  
mjbtnus at gmail.com writes:

Unfortunately, Jim, Matt @ SARTS advised me this morning that they  can no
longer service the 765 because of unavailability of so many OEM  parts. :( I
under where he's coming from given the scope of their service  coverage for
Icom radios. This therefore leaves me to my own devices. I  have seen quite 
a
few 765 modules parted-out on ebay (though at premiums by  in large). But, 
if
I could pin down the module the culprit resides in, that  might be a far 
more
practical way to go (given you have to put a $ on your  own time too at some
point). I will be digging deeper in the Service Manual  to see about tracing
out and testing the various modules for proper  function. Since I've really
nothing to lose at this point, it might be a  great way to become immersed 
in
the practice (as I am a software guy by  trade). :)

-----Original Message-----
From: Jim Haynes  [mailto:jhhaynes at earthlink.net] 
Sent: Wednesday, December 31, 2014 5:51  PM
To: Mark J Bailey (mjbtnus)
Subject: Re: [ICOM] IC-765 tuner and  total loss of RF from tuner circuit

You can call the ICOM repair  facility in Michigan and ask them if they
can repair a 765     269-429-2334    or www.sarts1.com    or
sarts at qtm.net


jhhaynes at earthlink dot  net

----
Your Moderator: Dick Flanagan K7VC:  icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316  MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net:  http://www.qsl.net/donate.html