[ICOM] 765 freq problem

[Marc & Tricia Niebergall]

Another great tip! Thanks.

Marc
On Feb 25, 2015 2:36 PM, <dstalk at execulink.com> wrote:

> The BFO trimmer caps caused drift issues in my 765. Replacing them
> with ceramic ones fixed the problem.
>
> 73, Don VE3HUR
>
> On Wed Feb 25 13:42:57 2015 mtniebs at gmail.com (Marc & Tricia Niebergall)
> wrote:
> >
> > This may have been discussed in past threads, but I could not find it,
> so:
> >
> > My 765 drifts off freq by approximately 150 hz.  This happens in a matter
> > of a few seconds. It will sometimes drift back. This affects both tx and
> rx
> > alike. I have been told it is likely in the reference oscillator.  Does
> > anyone have any experience with this phenomenon?  If so can you point me
> in
> > the right direction for troubleshooting?
> >
> > Thanks,
> > Marc- k7wxk
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>