[ICOM] 765 freq problem

[Marc & Tricia Niebergall]

Gary,
Thanks for the link. Will research thoroughly.

Marc
On Feb 25, 2015 11:11 AM, "Gary Fiber" <gfiber at comcast.net> wrote:

> Can't remember if the reference causes any issues, is it 30.72 MHZ? If
> some might be a trimmer cap causing the problem. There is a listing on
> www.qsl.net/Icom/oldicomfaq/Ic-765.html you should look at. This was
> written by the main 765 tech at the time when he worked at Icom America.
> See if any of the symptoms he lists match your issues. This tech moved on
> years ago but he took the time to list the more common issues with the
> transceiver, which helped us out in the support department tremendously.
>
> Gary P. Fiber K8IZ
>
>
>
> > On Feb 25, 2015, at 10:42 AM, Marc & Tricia Niebergall <
> mtniebs at gmail.com> wrote:
> >
> > This may have been discussed in past threads, but I could not find it,
> so:
> >
> > My 765 drifts off freq by approximately 150 hz.  This happens in a matter
> > of a few seconds. It will sometimes drift back. This affects both tx and
> rx
> > alike. I have been told it is likely in the reference oscillator.  Does
> > anyone have any experience with this phenomenon?  If so can you point me
> in
> > the right direction for troubleshooting?
> >
> > Thanks,
> > Marc- k7wxk
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>