[ICOM] Dual Band HT, 2 m rig, and much more FS

[Ken Simpson, W8EK]

Icom and related items For Sale --
Dual Band HT, Two meter FM rig, Power Supply, Speaker /
Phone Patch, Hand Microphones, Many HT Accessories including
batteries, Original Boxes, Cable, Speaker Microphones,
Communications Speakers, Manuals, and other Miscellaneous Items


Icom IC-W31 A, dual band HT:

The Icom IC-W31A dual bander has alphanumeric and memory
display. The transceiver's two dials are used for independent
tuning of the VHF and UHF band. This allows you to receive both
VHF and UHF simultaneously; or use the V/V and U/U functions
for receiving two frequencies on the same band. Full crossband
duplex is supported. Great for satellites.

You get 100 memories; each can be assigned a name. Alpha tagging
is also available for DTMF memory channels. You also get programmed,
full and memory skip scanning. Other features include impressive
audio, backlit LCD, 50 frequency PL encode, auto power off and
3 power levels.

Features
100 Alpha Memories
Extended Receive
3 RF Levels
Auto Repeater
DTMF Keypad
Battery Saver
DTMF Memories

This one works 100% and looks like new. It includes antenna,
belt clip, wrist strap, paper work, and an almost new battery
for $140.


Icom IC-28 H, 2 meter FM Transceiver:

The Icom IC-28H is a well-built 2 meter FM mobile transceiver
providing 50 watts (or 5 W) of power. The backlit LCD display
is readable over a wide range of light. It has 21 memories, with
programmed scanning or memory scanning. Requires 13.8 V DC at 9.5
amps.

Features:
21 Memories
Automatic Dimmer
Dual Scanning
Compact
Backlit LCD
Receive 138-174 MHz

This particular rig works fine and looks fine. It includes mic,
power cord, mobile bracket, and paper work for $60.


Extra mobile mounting bracket for IC-28 (or any rig needing a
5 1/2 inch wide bracket) $15


Icom PS-30 DeLuxe Power Supply:

The Icom PS-30 power supply delivers 13.8 VDC at 25 amps. This
power supply features a meter which can be set to display amperage
or voltage. Four outputs are provided on the rear panel. Output 1
is a hard wired, high amperage cable with the Icom standard 6 pin
Molex plug. Outputs 2, 3 and 4 provide low current outputs. This
power supply has a snap-out tilt bracket.  9.5 x 5 x 12.5 inches.

This one works 100% and looks extremely nice.
With paper work for $175.


Icom Speaker / Phone Patch

Although a phone patch is included, this is also a very nice speaker 
with Icom styling.

This one works fine and looks great.  $65



Icom HM-14 DTMF Touch Tone Microphone:

The Icom HM-14 has the standard round 8 pin connector as used
by most Icom radios. It has a 16 digit DTMF Touch Tone pad on
the back. It will work with the IC-25A, 28, 38, 45, 48, 77, 78,
120, 229, 271, 275, 290, 375, 451, 471, 475, 505, 575, 707, 718,
725, 728, 729, 735, 736, 737, 745, 746, 751, 756/PRO, 761, 765,
775, 781, 820H, 821H, 900, 901, 970, 1201, 1271, 1275, 2400,
3200, 3210, and probably others. It can be used to add a DTMF
microphone to a rig that does not normally have one.

This one has good audio quality, all 16 digits on the DTMF pad
work like they should, and the coiled cord is in extremely good
shape. $40


Icom HM-36 Hand Microphone:

The Icom HM-36 is used on most of the Icom HF rigs. It has
a round 8 pin plug, making it compatible with almost any of
the Icom rigs with this connector. This includes the IC-746
and 756 series, plus many more. It can also be used on VHF
UHF rigs.

It also has up / down buttons on the top for changing the frequency.

This one works 100% and looks like it is new. It likely was put
in a drawer after receiving it with a rig, and never used. $35


Accessories for Icom IC-2A, 3A, 4A, 02 A, etc. series of HTs:

Icom DC-1, 13 V DC adapter for many Icom HTs:
This adapter slides on the HT, in place of the battery
pack. If 13 V DC is applied, it converts the voltage to
the proper voltage for the HT.  This one works fine, and
looks fine. With paper work for $12.

Icom CP-1 DC cord
This cord will work with the DC-1 above, plus many other
items needing the 2.1 mm coaxial power plug.  The opposite
end has a cigarette lighter plug on it.  $10

Belt Clip for the above HTs.
Complete with hardware. $6


Batteries for Icom IC-2 AT series of HTs:

These items can be used on the IC-2 A, 3 A, 4 A, 02 A,
03 A, 04A, 2G AT, 32 AT series HTs plus many others.

Icom BC-25 U wall charger
Standard wall charger for most of these HTs. $15

Icom BP-3 Battery pack
This was the "standard" battery that came with many of
these HTs. It can be charged with a BC-25 U wall charger,
or the BC-30 or BC-35 desk chargers, or with 12 V DC.
This one appears to hold a charge OK. $10

Icom BP-5 Heavy duty battery pack
This battery has several times the capacity of the BP-3,
and slightly higher voltage for more power output.
It must be charged by a desk charger (BC-30 or BC-35).
For rebuilding only. Battery is dead. $5

W & W aftermarket BP-8 Heavy duty battery pack
This is a NiMH pack, 8.4 V at 2700 mahr; extremely heavy
duty, long life.
This one looks close to new; excellent electrical condition. $30


DC Power Cable

This is the heavy duty power cable as used on most of
the Icom HF rigs, plus also many Kenwood, Alinco, and others.
It has the 6 pin molex connector, with four pins used - two
for plus and two for ground.  The cable may not have ever
been used. It looks good, and of course works fine. $22


Original Boxes for Icom IC-27 mobiles and IC-V8 HT:

The box for the IC-27 includes the two internal
styrofoam inserts that holds the rig, the cardboard
box for accessories that also acts as a spacer,
and even includes the original plastic bag for
the rig.
It is in nice condition. $8

Original box for Icom IC-V8 HT
Complete with insert. Looks like new. $8


Several Speaker Microphones:

All of these speaker mics have the 3.5 mm and 2.5 mm two
conductor plugs that are spaced about 3/8 inch apart, and
are molded into a single connector. They are used on Icom,
Yaesu, Radio Shack, Maxon, Ritron, Vertex and many other
radios.

Premier SPM-100
It is a lightweight and compact unit, featuring a powerful
speaker as well as a high-quality condenser-style microphone
element that produces excellent transmitted audio clarity.
The microphone may be secured to the user's lapel or shoulder.
It also features a built-in 3.5mm jack for using an external
earphone. $18

DM-100
Appears to be the same as the SPM-100 above, but just with
a different label. $18


Icom Battery Charger:

Icom BC-127 A, Battery Charger for Icom IC-Q7A Dual Band HT:
This charger charges two AA NiCads (or NiMH) for the
IC-Q7 A Dual band HT, and Icom R-2 receiver, and probably
others.
This appears to be new, unused, still in its bag.
Icom lists them at $21. Buy this one for $12.


Communications Speakers:

Realistic 21-549 A
This speaker is about 4 inches square and about 2 inches
deep. It is rated for 5 watts, has an 8 ohm impedance, and
is listed as a 300 to 3000 Hz frequency response, making it
ideal for communications. It has a 3.5 mm (1/8 inch) mono
plug, as used by most modern rigs. Gimbal mount included.
It is black in color, looks great, and sounds great. $12

Vanco SPB-5
Appears to be the same at above, but with a Vanco label.
Also includes gimbal mount. $12

Vanco SPB-6
Similar to SPB-5 above, but is considered a noise
cancelling speaker. 10 Watt rating. Still in original
box, new. $18


HT Belt Clips and Wrist Straps:

Belt Clips:
All include the hardware with the belt clip and are $6 each.
Icom IC-2 AT
Kenwood BH-6
Motorola
Yaesu FT-207
Yaesu FT-209

Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, TR-2500, etc.
Kenwood TR-2400
Yaesu FT-209


Antennas for your HT:

All rubber ducks are for 2 meters, are in good
condition, and are $10 each, unless stated otherwise.

BNC - Dual Band (2 m and 440 MHz) Telescoping antenna
provides significant gain when extended, $18

BNC - As used on most HTs, 7 inches long

BNC - Original Alinco EA0024, about 4 inches long

BNC - Original from Kenwood TH-215, about 5 inches long

BNC - "Stubby" about 4 1/2 inches long

Type F connector - 6.5 inches long

BNC Stubby for 440 MHz, 3 inches long

Threaded (as used by Motorola, etc.) stubby for 440 MHz

Not a Rubber Duck, but can be used on your HT:
Telescoping Antenna w/ BNC about 19 inches long
can be used as a quarter wave antenna on 2 m,
or on 220, or 450 MHz if telescoped shorter. $12


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom manuals
and are not copies. All are in very good condition.
These are original Icom manuals only.

SPECIAL:
Buy two, three, or four manuals and take 10% off.
Buy five or more and take 20% off.

Mobile transceiver and HT manuals:
IC-2 AT, 2 meter HT, still in plastic bag, $6
IC-22 A, 2 m FM transceiver, $10
IC-22 S, 2 m FM transceiver, $12
IC-27 A/E, 2 m transceiver, still in plastic bag, $15
IC-27 H, 2 m FM transceiver, $12
IC-28 H, 2 m FM transceiver, $12
IC-290 H, 2 m FM transceiver, still in plastic bag, $15
IC-736/738, HF + transceiver, $20
IC-751, HF transceiver, still in plastic bag, $22
IC-820 H, Dual Band Transceiver, original, $18
IC-820 H, good copy, not original $10
IC-3200 A/E, Dual Band FM Transceiver, $15
IC-V8, 2 meter HT, $6

Other Icom manuals:
BC-30 Desk Charger, $4
BC-35 Desk Charger, $5
BP-2, BP-3, BP-4, BP-5 battery packs, $3
BP-21, BP-22, BP-23, and BP-24 Batteries, $3
DC-1 DC pack for IC-2 AT series HTs, $4
EX-310 Voice Synthesizer, $5
HM-8 Hand Microphone, w/schematic, $5
HM-10 scanning microphone, $3
IC-3 PA Power supply / speaker, $10
MB-5 mobile bracket, $2
MB-65 mobile bracket mount, $2
RC-10 Frequency controller, $4
SM-5 desk microphone, $3
UT-16 Voice Synthesizer, $5

These are original Icom manuals only.


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs,
HF and VHF/UHF antennas, HF linear amplifiers, and many
other accessories.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400