[ICOM] IC-765 question

[Walt - WB2VSJ]

OK - Ignore that.  My brain transposed the 765 to 756.  I assume now that
the 765 has a built in AC supply, the 756 (which I have) does not 

Walt  - WB2VSJ

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Walt - WB2VSJ
Sent: Wednesday, April 22, 2015 14:12
To: 'ICOM Reflector'
Subject: Re: [ICOM] IC-765 question

Out of curiosity - what are you using as a power supply?  

Walt - WB2VSJ

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Marc & Tricia
Niebergall
Sent: Wednesday, April 22, 2015 14:08
To: ICOM Reflector
Subject: [ICOM] IC-765 question

When pushing the AC on switch there is sometimes a pause of a couple seconds
before the rig powers up.  Other times it comes on almost instantly.  This
usually occurs on the first application of the day.  Don't know if it is a
relay or an electrolytic capacitor taking time to charge or what.  I changed
two 33uf electrolytics in the power supply that were swollen, but no change.
Any suggestions are welcome.

Thanks,
Marc-k7wxk
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html