[ICOM] IC-765 Sensitivity Problem

[David Wood]

I had exactly the same issue and had to replace the attenuator relays.  Good
luck!  73  Dave

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Bry Carling
Sent: Saturday, April 11, 2015 2:08 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC-765 Sensitivity Problem

Tap around inside there with the cover off and see which item is sensitive
to being touched. If that doesn't work you can try spraying some freezing
cold spray stuff which will often pinpoint an intermittent problem.

Best regards - Brian Carling
AF4K Crystals Co.
117 Sterling Pine St.
Sanford, FL 32773

Tel: +USA 321-262-5471




> On Apr 11, 2015, at 12:23 AM, Marc & Tricia Niebergall <mtniebs at gmail.com>
wrote:
> 
> I am encountering an intermittent RF sensitivity problem which can be
> cleared up by tapping on the side of the cabinet.  The Icom FAQ's suggest
> changing RL-13, so that is what I did. I thought the problem was solved,
> but now it is back.  Are there any other suggestions I might try?  It is
> definitely a connection of some sort, because tapping on the side of the
> cabinet temporarily clears it up.
> 
> Thanks,
> Marc-k7wxk
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html