[ICOM] ICOM IC-2100 vs 2100H

[rrocket88 at netzero.net]

I have a pdf of the service manual IC-2000H/IC-2000
 if it is ok to post it here.

73 Randy K4IMZ

---------- Original Message ----------
From: <ma.locksmith at juno.com>
To: icom at mailman.qth.net
Subject: Re: [ICOM] ICOM IC-2100 vs 2100H
Date: Wed, 17 Sep 2014 08:47:40 -0400

Now that you have the service manual, you can see there IS a diode, and
it's on the board.

If the input is not shorted, is it open?  If you measure the diode on the
board, is it open, shorted, or good?

Ed
K1ZOK

On Tue, 16 Sep 2014 13:34:58 -0500 D C _Mac_ Macdonald
<k2gkk at hotmail.com> writes:
> I don't know if Icom had included a reverse protection diode. The 
> input line is NOT shorted but I really suspect that reverse polarity 
> was applied WITHOUT a fused line. 
>  
> I guess the first thing to do is try to find a service manual for 
> the radio. 
>  
> Thanks to those who have replied so far. 
>  
> * * * * * * * * * * * 
> * 73 - Mac, K2GKK/5 * 

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html