[ICOM] IC-718

Joe nss at mwt.net
Thu May 15 08:56:20 EDT 2014


Still trying to make sure.

OK the audio going into the radio from the signalink.

Will the speech processor ( Mic Compressor ) effect it at all if turned 
on or off?

I like how the signalink passes all the audio even like wav files. and 
need to learn if when playing a recorded wav file if the processor can 
be used or not.

Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 5/11/2014 9:37 AM, Joe wrote:
> See below for comments,,
> Sig
> The Original Rolling Ball Clock
> Idle Tyme
> Idle-Tyme.com
> http://www.idle-tyme.com
> On 5/11/2014 9:13 AM, Patrick - KB8RTZ wrote:
>> When the signalink box is plugged into the acc connector, make sure you turn the mic gain down to zero through the menus. The mic gain control does not affect AFSK or PSK operation, but the mic does not mute during transmission.
> So I Understand then when we switch from say SSB to RTTY, we need to 
> turn down the mic gain so any sounds in the area that is picked up by 
> the MIC does not get mixed in with the RTTY signal.
>> The speech processor does not affect the incoming audio, either.
> In coming as in going "INTO" the rig. From the signalink box not 
> incoming as from the airwaves.
>> The beauty of using the rear acc connector as opposed to the headphone or external speaker jack is you can turn down the volume control without affecting the input audio to the signalink box. The input audio level is controlled by the receive audio knob on the signalink box.
>>
>> 73 ... Patrick ...
>>
>> Sent from the magic of technological innovation
>>
>> On May 11, 2014, at 9:33, Phil Krichbaum<vailphil at sopris.net>  wrote:
>>
>> I used the ACC plug for AFSK RTTY and WSJT for audio in and out with my 756PROIII and neither of these controls have any effect. On the PROIII I'd use the USB Digital position which also brought in to play a nice twin peak 350 Hz RX filter which was excellent for RTTY.
>>    73 Phil N0KE
>>
>> Joe wrote:
>>> When inputting audio for say AFSK from a signal link box into the rear ACC jack. Two questions.
>>>
>>> 1-  Does the front MIC gain control this level also?
>>>
>>> 2- The Speech Processor, Does it also apply to this input also if it is on or off?  Obviously you would not want it to be on when running RTTY or PSK I just wonder if either of these controls effect audio that in coming into the rig via the rear connector.
>>>
>>> Joe WB9SBD
>> ----
>> Your Moderator: Dick Flanagan K7VC:icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ:http://www.qsl.net/icom/
>> To support QSL/QTH.net:http://www.qsl.net/donate.html
>> ----
>> Your Moderator: Dick Flanagan K7VC:icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ:http://www.qsl.net/icom/
>> To support QSL/QTH.net:http://www.qsl.net/donate.html
>>
>>
>



More information about the Icom mailing list