[ICOM] Programming software for IC-2800H?

[Larry L. Hinton]

I did not look that close at the site. However, I would seriously doubt the same software for the 2800 and 2820. The IC-2800 was discontinued with the IC-27XX series some time ago and was not D-Star. As you know, ICOM, and for that matter all manufacturers are notorious for "upgrading" (read proprietary) their software and accessories for each radio.

Larry
K7YBZ

 

________________________________
 From: D C _Mac_ Macdonald <k2gkk at hotmail.com>
To: Icom Forum <icom at mailman.qth.net> 
Sent: 
Subject: Re: [ICOM] Programming software for IC-2800H?
  

The highfields site below shows use of the Icom CS-2800 software to program the IC-2820. 

Could it be that the IC-2820 software will program the IC-2800?  I am not familiar with the IC-2800 and its capabilities. The Russian site shows files of differing sizes for 2800 and 2820. 
  
* * * * * * * * * * * 
* 73 - Mac, K2GKK/5 * 
* (Since 30 Nov 53) * 
* k2gkk hotmail com * 
* Oklahoma City, OK * 
* USAF & FAA (Ret.) * 
* * * * * * * * * * * 




> Date: Mon, 28 Jul 2014 14:02:31 -0700
> From: hinton.ll at frontier.com
> To: icom at mailman.qth.net
> Subject: Re: [ICOM] Programming software for IC-2800H?
> 
> If it is the cloning software, this is what I found in a two minute search:
> From 
> http://highfields-arc.co.uk/constructors/other/icomprog/ic-num.htm
> This site lists the cable and software. Also on that page there is a link to another site for software:
> 
> http://radiohelper2011.narod.ru/
> 
> The ICOM 2800 is the seventh entry down. The file is a zip file. I HIGHLY RECOMMEND scanning with a very good anti-virus software before attempting to use.
> 
> Larry
> K7YBZ
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html



                          
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html