[ICOM] pro 3 repair?

[KK2DOG in NY]

Mike's my go-to man:  http://www.n1eq.com/
                    KK2DOG

> From: marditti at dslextreme.com
> To: icom at mailman.qth.net
> Date: Fri, 25 Oct 2013 19:43:06 -0700
> Subject: Re: [ICOM] pro 3 repair?
> 
> I want to confirm Jim's WB8HMD comment about Scott.
> Just last month Scott did check my IC706MKIIG, he was honest fair and
> prompt.
> I am very pleased.
> 
> Mort,  NA6MA
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Taylor Jim-CJT001
> Sent: Friday, October 25, 2013 2:49 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] pro 3 repair?
> 
> I used this for the repair of my 735 a couple of years ago, and the
> communications, service, and quick turn around that Scott provided were very
> good. I suggest giving him a call to see if he can or is willing to look at
> a Pro 3. 
> 
> http://www.angelfire.com/biz2/mts/ 
> 
> Regards,
> 
> Jim T.
> WB8HMD
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of k0bx at arrl.net
> Sent: Friday, October 25, 2013 4:33 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] pro 3 repair?
> 
> Whats up Chuck?
> 
> Had to say it, I setn my Pro-3 to Icom East the 1st time.  Did a FB Job, 2nd
> time (out of warranty) I sent it to Burkhart in SD.  They installed a
> Front-End mode on mine.
> Mine had no output on any band but it was not the finals.
> 
> Joe K0BX
> 
> 
>  
> #1 Honor Roll Mixed
> Honor Roll RTTY
> 
> 
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without my permission.
> 
> 
> ________________________________
>  From: "KI9A at aol.com" <KI9A at aol.com>
> To: icom at mailman.qth.net
> Sent: Friday, October 25, 2013 9:12 PM
> Subject: [ICOM] pro 3 repair?
>  
> 
> Gang, my pro3 just popped the PA, intermittent output varies from  around
> 90w down to 20w on all bands ( yes, into a 50 ohm load).
> 
> Who is the guy to send it to these days? I sent a 746 off about 10 yrs  ago
> for some work, ant remember where though.
> 
> 73- Chuck KI9A
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
> support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
> support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> 
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html