[ICOM] 756 PROIII audio bleed thru with Dual Watch

[Phil Krichbaum]

Doug and Roland,
    Mine worked properly at first and gradually got worse. I had it 
fixed once and it was again OK at first and then gradually got worse! At 
least if I have a strong signal bothering me on the DUAL WATCH signal, I 
can eliminate it by just tapping the DUAL WATCH button and I'm still 
TXing on the same split freq. Seems like an issue that affects several 
of US?
    Phil N0KE

Become A Ham wrote:
> Hi Phil and Doug,
> My IC-756PRO III does the same thing since day one.
>
>
> 73,
> Roland
> K5CW
> "Duty, Honor, Country..."words to live by, spoken by General Douglas
> McArthur
>
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Doug Renwick
> Sent: Thursday, March 21, 2013 20:35
> To: 'ICOM Reflector'
> Subject: Re: [ICOM] 756 PROIII audio bleed thru with Dual Watch
>
> Mine does the same.
>
> Doug
>
> "Think of all the ways you can hurt yourself laughing."
> -----Original Message-----
>
> When using the 756 PROIII SPLIT and with the DUAL WATCH I get some serious
> bleed thru of strong signals from the split freq to the main freq even with
> the balance control fully CCW. I had it repaired once but it keeps getting
> worse again. I talked to one of the Icom reps at a convention and he claimed
> he was unaware of this being a problem? Is this a common problem? I don't
> always believe the factory people's answers.
>     Phil N0KE
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>