[ICOM] IC-7100
Roger (K8RI)
k8ri at rogerhalstead.com
Mon Jul 29 00:41:04 EDT 2013
On 7/28/2013 6:30 PM, bonddaleena at aol.com wrote:
> OK, you said you did an A/B test, but you never mentioned what you compared the 756PRO to.....
>
> I have compared my PRO to:
With an A/B test?
Well, I've owned most of what you mentioned and have fond memories of my
75A4/KWS1 heating the shack, but regrettably I only did the A/B
comparison on the FTDX5000MP .As I said, The 756 Pro that appears to
check out with the spectrum analyzer. is still a good rig, but the
5000MP beat it out for selectivity, dynamic range and sensitivity. It
heard stations the 756 Pro didn't know were there, copied stations that
were covered up by adjacent QRM and let me talk to stations on a band
filled with QRN from storm just a few hundred miles away that made copy
on the 756 Pro difficult.
OTOH the 756 Pro is light, and goes portable quite easily.
But for normal use, without the A/B comparison it seems to be pretty
good and I like it.
>
> 75A-4 (recapped, aligned, etc)
> 745 (purchased new)
> 761 (serviced by Scott)
> Drake R-4B (3 of them)
> Drake R-4C (with all the Sherwood mods)
> R-390A (well tuned)
> R-388 (6 of these)
> 51J-3
> SPR-4
> R-71A
> Drake 2-B
> Drake 2-C
> Drake TR-4 (5 of these)
> Halli 117 (modded by the ER articles)
> R-1051B
> SX-101A (recapped, etc)
>
The only ones I've not had are the 388, 51J, SPR4 (don't even recognize
that one, and the R71.
I rebuilt a lot of 101As and a MK-III, but they got too heavey for a guy
my age. I still have a 33B with the ceramic 8295A. Sold the HT32Bs so
have nothing to match it.
OTOH I had several S-lINES AND kWM2S AND 2AS. I'd like to pick up a 2A
(same rig, just more crystals) and PS for my shop.
Those old Collins rigs put out cleaner signals than all but a few of
today's rigs.
> dozens of others, etc, etc
>
> The PRO is still the receiver to beat. Maybe 'cause it was a JA radio that I hand carried back from Tokyo???
>
As I said, I still like and use the original 756 Pro, not a II, or III.
> For many years, the receiver has been limited by noise, either man made or atmospheric.
> The point of diminishing returns was reached a loooong time ago.
Agreed and with the top end rigs with those fantastic specs, the average
ham would never be able to tell the difference.
I'd like to see them clean up the signals. Most SS rigs are running a
3rd order IM in the low to mid 30s while the old Collins was close to 50db.
I think most hams don't realize that super selectivity and dynamic range
does nothing to help when the station 10 KHz +/- is splattering or buck
shoting right in your bandpass.
That's why I'd like them to concentrate on finals instead of a
sensitivity that is way below the band noise. What good does a 0.1 uv
sensitivity do on 160, 75, and 40? The dynamic range does sometimes
make life livable when a really big signal comes on within 10-20 KHz.
Selectivity? A good filter, IF shift, and a good notch can work wonders
that a fantastic selectivity figure will fail to do and there the old
756 Pro does pretty well on CW.
73,
Roger, (K8RI)
>
> ron
> N4UE
>
More information about the Icom
mailing list