[ICOM] Icom Digest, Vol 10, Issue 15

[Gerald Bishop]

Hi- Check to see if any of your pre-sets are out of the band??? Sounds 
stupid,I jknow ,but had somewhat the same thing and that was the answer I 
got after sending it in !!Hard to believe. I use all pre-sets for the digi 
stuff. Any of the vfo's !! Jerry W8KQ
----- Original Message ----- 
From: <icom-request at mailman.qth.net>
To: <icom at mailman.qth.net>
Sent: Saturday, January 19, 2013 12:00 PM
Subject: Icom Digest, Vol 10, Issue 15


> Send Icom mailing list submissions to
> icom at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/icom
> or, via email, send a message with subject or body 'help' to
> icom-request at mailman.qth.net
>
> You can reach the person managing the list at
> icom-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Icom digest..."
>
>
> Today's Topics:
>
>   1. Re: ic-756 (C.Whitaker)
>   2. Re: ic-756 (Jack)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 19 Jan 2013 07:12:04 -0500
> From: "C.Whitaker" <whitaker at pa.net>
> To: icom at mailman.qth.net
> Subject: Re: [ICOM] ic-756
> Message-ID: <50FA8D94.8090204 at pa.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> de WB2CPN
> I do not believe this.
> 73
> Clete
> ++++++++++++++++++++++++++
> On 1/18/2013 4:42 PM, Bob Jaeger wrote:
>> I am having a problem with the transmit button below the power on
>> button . When i engage it
>> in cw or ssb mode there is no output shown on the scope and there is
>> no output . If the radio is in
>> Rtty mode there is output . I do have output in ssb mode through the
>> mike , speaking into the mike  .
>>   Does anyone have an idea as to what is causing this problem . Thanks
>> for any help you can provide .
>>                                              Bob N2DXJ
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 19 Jan 2013 07:58:58 -0500
> From: Jack <k4wsb at arrl.net>
> To: ICOM Reflector <icom at mailman.qth.net>,
> Subject: Re: [ICOM] ic-756
> Message-ID: <0MGV00KC7IQC0G50 at vms173019.mailsrvcs.net>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> Huh?
> Believe what?
>
>
> At 07:12 AM 1/19/2013, C.Whitaker wrote:
>>de WB2CPN
>>I do not believe this.
>>73
>>Clete
>
>>++++++++++++++++++++++++++
>>On 1/18/2013 4:42 PM, Bob Jaeger wrote:
>>>I am having a problem with the transmit button below the power on
>>>button . When i engage it
>>>in cw or ssb mode there is no output shown on the scope and there
>>>is no output . If the radio is in
>>>Rtty mode there is output . I do have output in ssb mode through
>>>the mike , speaking into the mike  .
>>>   Does anyone have an idea as to what is causing this problem .
>>> Thanks for any help you can provide .
>>>                                              Bob N2DXJ
>>>----
>
>
> Jack Hartley
> K4WSB / VP2MSB
> #1 DXCC Honor Roll
> QCWA OOTC
> "Celebrating over 1/2 century in Ham Radio"
>
>
>
> ------------------------------
>
> _______________________________________________
> Icom mailing list
> Icom at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/icom
>
>
> End of Icom Digest, Vol 10, Issue 15
> ************************************
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2890 / Virus Database: 2639/6042 - Release Date: 01/18/13
>