[ICOM] ic-756

[Bob Jaeger]

   No I am not keying it when I push the transmit button in ssb or cw 
mode  . My prime concern
is with the ssb mode .
On 1/18/2013 4:52 PM, Michael Weissman, M.D. wrote:
> Forgive me if this sounds trivial but are you keying the transmitter 
> with a key after you push transmit?
>
> 73, Mike
> K2CBI
>
>
> On 1/18/2013 4:42 PM, Bob Jaeger wrote:
>> I am having a problem with the transmit button below the power on 
>> button . When i engage it
>> in cw or ssb mode there is no output shown on the scope and there is 
>> no output . If the radio is in
>> Rtty mode there is output . I do have output in ssb mode through the 
>> mike , speaking into the mike  .
>>   Does anyone have an idea as to what is causing this problem . 
>> Thanks for any help you can provide .
>>                                              Bob N2DXJ
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>