[ICOM] ICOM IC-208H mic gain question

[George J. Nixon Jr.]

Hi Ed!
 
There are a couple of toggle adjustments in the set menu, both of which I've tried.  Good to hear from you again!
 
73 - George, N9EJS
 
= = = = = = = = = = = = 



On Friday, December 6, 2013 3:51 AM, Edward L Dowdy <ka9ees at comcast.net> wrote:
  
Isn't there an adjustment in the set menu? Been a long time since I have 
messed with one.

73,
Ed KA9EES
Fithian IL

Hi George!a


-----Original Message----- 
From: George J. Nixon Jr.
Sent: Friday, December 06, 2013 3:18 AM
To: icom at mailman.qth.net
Subject: [ICOM] ICOM IC-208H mic gain question


I've had two IC-208H microphones and I get reports of low mic gain.  I've 
tried the different settings referred to in the owner's manual, without much 
reported difference.  I've also opened the insulation behind the aperture in 
the mic itself.  Is there an internal pot adjustment, or part replacement 
that can be used for this purpose?   I'm also looking for about a 2 ft. 
coiled mic 8-conductor cable for the HM-133 on it also!
Thanks and 73 - George, N9EJS
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html