[ICOM] IC-HM7 Microphone Connector

[Ken]

Larry;
    Thanks, works perfect.

Ken


On Sat, 2013-11-09 at 17:29 -0800, Larry Young wrote:
> Ken, If the connector on the HM-7 microphone is the round 8 pin connector, The correct name for it is a "Foster connector", and Radio Shack lists them as available in their stores as PN 274-025.
> Larry K4LXV
> 
> 
> 
> 
> ________________________________
>  From: Ken <ken at wa0sbu.com>
> To: icom at mailman.qth.net 
> Sent: Saturday, November 9, 2013 3:40 PM
> Subject: [ICOM] IC-HM7 Microphone Connector
>  
> 
>      I have a IC-730 with a IC-HM7 microphone.  The snap ring on the
> connector came off, so now if I pull on the cable, the microphone pops
> off the radio.  Anyone know what connector is used?  I'll buy one just
> to get the snap ring off of it.
> 
> 73's  Ken
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html