[ICOM] re sub for RL-13 re IC-765

Dave K6DLW k6dlw at charter.net
Tue Nov 27 20:42:12 EST 2012


Solder in. I had the same problem so I took the relay out and burnished it 
but no go. Need a new one.

Dave K6DLW

----- Original Message ----- 
From: <w7apm at mtaonline.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, November 27, 2012 1:53 PM
Subject: Re: [ICOM] re sub for RL-13 re IC-765


> Is this a solder in or plug in?
>
> Tnx
> Marty
>
>
> --- k4lxv at bellsouth.net wrote:
>
> From: Larry Young <k4lxv at bellsouth.net>
> To: ICOM Reflector <icom at mailman.qth.net>
> Subject: Re: [ICOM] re sub for RL-13 re IC-765
> Date: Tue, 27 Nov 2012 09:42:21 -0800 (PST)
>
> Fern; If the relay is an Omron LY20DC12 DPDT relay, the Avnet has them in 
> stock for about $7.00 each.
> See: 
> http://avnetexpress.avnet.com/1/1/348776-omron-electronics-electromechanical-relay-dpdt-10a-12vdc-160ohm-through-hole-ly20dc12.html
> I hope this is the one.
> Larry K4LXV
>
> --- On Tue, 11/27/12, Fern <crc at cyberlink.bc.ca> wrote:
>
> From: Fern <crc at cyberlink.bc.ca>
> Subject: [ICOM] re sub for RL-13 re IC-765
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Date: Tuesday, November 27, 2012, 12:05 PM
>
> Does anyone have a cross over or replacement relay for RL-13 in IC-765? 
> Part number in service manual is LY2-0-DC-12V and new part # 6330000490. 
> The price from Icom is out for lunch. Shipping would be to zip 83826.
> Thanks from Fern
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html 



More information about the Icom mailing list