[ICOM] Hooking a SP-2000 or SP-7000 to a ICOM 910

[Steve]

I think the coax from the 910 needs to go to the one marked TRX. The 
one marked ANT should go to the antenna directly.
I guess you just seal the SO-239 being as it will be unused.


At 08:54 PM 5/20/2012, you wrote:
>I have a SSB SP-7000 antenna mounted Preamp that I want to power with my
>ICOM 910.
>
>
>
>The 910 can send power up the RF coax to the preamp.
>
>
>
>However, the SP-7000 has 3 RF connectors. 2 N-Connectors, One marked ANT the
>other TRX.
>
>And the 3rd RF connector, is a UHF SO-239 marked +13.8v
>
>
>
>Supposedly, the SP-7000 can take the power via the antenna coax.
>
>
>
>If I power the coax from the 910 and plug it into the N connector marked ANT
>will the preamp be getting the power correctly?
>
>
>
>If not, how?
>
>
>
>Thanks,
>
>Kent
>
>KQ4KK
>
>
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html