[ICOM] Icom and related items FS

[Ken Simpson, W8EK]

Speaker Microphones, Charger, Manuals,
Dummy Load, and other Miscellaneous For Sale:


HT Speaker Microphones:

All of these have the 3.5 mm and 2.5 mm plugs on them,
as used by Icom, Alinco, Radio Shack, some Yaesu, and
other HTs.

Pryme Speaker Microphone
It works fine and look line new. $20

Azden SDX-316
This is the rounder style speaker mic that fits nicely in
the palm of your hand. $ 20

MFJ-284 Speaker Microphone
Fits most Icom, Yaesu, Alinco 560, Santec ST-20, and others.
It works great, and looks like new. $15

MFJ-287 Speaker Microphone
This fits the TH-21/31/41 series HTs, TH-205, TH-215, TH-415,
as well as others. It has a 3 conductor 3.5 mm plug and a 2
conductor 2.5 mm plug.
It works fine, and looks close to new. $15


Icom Battery Charger:

Icom BC-127 A, Battery Charger for Icom IC-Q7A Dual Band HT:
This charger charges two AA NiCads (or NiMH) for the
IC-Q7 A Dual band HT, and Icom R-2 receiver, and probably
others.
This appears to be new, unused, still in its bag.
Icom lists them at $21. Buy this one for $12.


Icom DC adapter:

Icom DC-25
This is a pack that is used on the Icom µ2AT, Icom µ4AT, and
on other HTs that use the BP-20, BP-21, BP-22, BP-23 and BP-24
battery packs.  It takes 13 V DC (such as from a cigarette
lighter), and converts it to the 9.4 V DC voltage needed for
the HT.  It is used in place of a battery.  This one works
fine and looks fine.  $18


Wall Wart Power supply:

All are standard "non-switching" types, with no noise like
the switching types have.

AEA AC-1 "Wall Wart" Power Supply
This "Wall wart" power supply will supply 12 V DC at
up to 1 amp.
It can be used with the AEA PK-232, PK-88 or others.
This unit has a 2.1 mm plug, with the center positive,
so it can be used on many different things that require
12 V DC at up to an amp, such as keyers, antenna tuners,
etc. $14


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom manuals
and are not copies. All are in very good condition.
These are original manuals only.

BC-30 Desk Charger $5
BC-35 Desk Charger $7
BP-2, BP-3, BP-4, BP-5 battery packs $3
BP-21, BP-22, BP-23, and BP-24 Batteries $3
DC-1 DC pack for IC-2 AT series HTs $4
HM-8 Hand Microphone, w/schematic $5
IC-22 S, 2 m FM transceiver $12
IC-28 H, 2 m FM transceiver $12
IC-3 PA Power supply / speaker $10
UT-16 Voice Synthesizer $5

These are original manuals only.


Homebrew "Cantenna" Dummy Load:

This dummy load is similar to the Heath HN-31 "Cantenna", but
it is homebrew. It has an SO-239 connector on the top of a
black, one gallon paint can. The paint can completely shields
the dummy load. Inside, it basically has 33, 2 watt, 1800 ohm
resistors in parallel, to create the load. These resistors
will not handle 1000 watts like the Heath "Cantennas", but
should handle 100 watts as long as you are not too heavy
on the key. These resistors are presently air cooled. Adding
oil would certainly increase the power dissipation.

This unit works fine, and looks very, very nice. No paper
work on this one, but what do you need to show resistors
in parallel? $25


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400