[ICOM] IC 765 Issue

[Nathan Moreschi]

Thanks Al - If something comes my way, I'll let you know.

73,

Nate/N4YDU

-----Original Message----- 
From: Al VE1AL 
Sent: Friday, March 09, 2012 11:06 AM 
To: 'ICOM Reflector' 
Subject: Re: [ICOM] IC 765 Issue 

My 761 has the same problem, except it is 100Hz down.  Since I have never
heard of a fix, I simply leave it set that way.  But I do have to try to
remember when switching to SSB (which I do very, very infrequently) to hit
the clear control so folks won't get upset with me being off frequency.

I never saw a responses, Nate, so if you got any perhaps you could pass
them along to me directly.

73

Al, VE1AL





-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Nathan Moreschi
Sent: Thursday, March 08, 2012 10:36 PM
To: ICOM Reflector
Subject: [ICOM] IC 765 Issue


Icom Reflector,

I have an ICOM 765 that has developed a problem. The unit is transmitting
300hz below the receive frequency on CW. For quick fix in a recent contest
I simply ran the RIT at minus 300hz and it worked fine.

This problem did go away briefly and then came back.

Any ideas what needs to be adjusted?


73,

Nate/N4YDU 

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html