[ICOM] [GMC] Icom 756 PROIII bleed thru of DUAL WATCH to MAIN vfo

[Phil Krichbaum]

Doug,
    I've not noticed anything else that was affected (good or bad). 
There is now no bleed thru of the DUAL WATCH signals to the main VFO  
after the fix and I was using it in some good pileups on the 3C0E. The 
rig worked like this when I first got it and the bleed thru came on 
gradually and was pretty bad before the fix.
    Phil N0KE

Doug Renwick wrote:
> I have that same bleed thru on my Pro III and I believed that was normal and
> couldn't be corrected.  Any idea what the fix was and did the fix affect
> anything else.
>
> Doug
>
> I'll run the race and I will never be the same again. 
>
>   
>> -----Original Message-----
>>     
>
>   
>>    By the end of the day the display went totally black and I sent if
>> off to Tim Moes at Midwest Technical Services in Watertown SD. It turns
>> out the backlite xfmr, a transistor and a cap were gone. He also cured
>> the audio feed thru problem I was having with the Dual Watch where
>> strong signals on the split frequency were bleeding thru to the primary
>> RX frequency even with the Balance control fully counter clockwise.
>> Anyways another good and quick fix by Tim and at a reasonable price as
>>     
> well.
>   
>>    73 Phil N0KE
>>     
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>