[ICOM] IC-756 Pro iii memory save?

[Stephen Budensiek]

Hello guys,
   The Pro Memory Editor does everything.   Had a guy email me one, it
displayed like a spreadsheet display, but again, no memory name
displayed.  This does it all, makes it nice to see the memory names
also.  It's not set up for the Pro3, but changing the parameters to
the pro3, closing it, then restarting it does the job.  Thank all of
you for the notes and help.

73's de Stephen, K0SD

*********************************

On Wed, Feb 29, 2012 at 10:34 PM, Stephen Budensiek <kzerosd at gmail.com> wrote:
> Hello,
>   I'd really like to find what program(s) would work good at saving
> and/or loading or modifying the contents of the Pro 3's 101 memories,
> along with the name field contents for each memory.  It's real slow
> re-loading name field info after changing frequencies in the radio.
> It was also be nice if it backed up the 3 memory contents for the band
> memories.  I like to have a cw, rtty, and ssb frequency for each band,
> so I can just touch the band button, and step through the cw frequency
> (usually 5 up from the bottom), rtty around 085 on each band except
> WARC (18105 and 24925).   I have lot of 6 and 10m beacons with beacon
> callsign in the name slot in these, the 60m band ssb and new cw
> frequencies, time signal frequencies, some marine ssb stuff, you name
> it.  It sure would be nice to load all these if I had to reset the
> radio, or other causes.  Recently changed radio's, took hours to do
> all this.  Wonder what suggestions the group would have?
>
> 73's de Stephen, K0SD