[ICOM] IC-756 Pro iii memory save?

[john]

I have used Icom Pro Memory Edit.
http://www.plicht.de/ekki/software/pme.html 
on my 746. I know you have a 756 pro III, It says it supports 
756 Pro II. It is old software but it is free so I would give it a try
and see what happens. 

John
N7JL

On Wed, 2012-02-29 at 22:34 -0500, Stephen Budensiek wrote:
> Hello,
>    I'd really like to find what program(s) would work good at saving
> and/or loading or modifying the contents of the Pro 3's 101 memories,
> along with the name field contents for each memory.  It's real slow
> re-loading name field info after changing frequencies in the radio.
> It was also be nice if it backed up the 3 memory contents for the band
> memories.  I like to have a cw, rtty, and ssb frequency for each band,
> so I can just touch the band button, and step through the cw frequency
> (usually 5 up from the bottom), rtty around 085 on each band except
> WARC (18105 and 24925).   I have lot of 6 and 10m beacons with beacon
> callsign in the name slot in these, the 60m band ssb and new cw
> frequencies, time signal frequencies, some marine ssb stuff, you name
> it.  It sure would be nice to load all these if I had to reset the
> radio, or other causes.  Recently changed radio's, took hours to do
> all this.  Wonder what suggestions the group would have?
> 
> 73's de Stephen, K0SD
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html