[ICOM] Garbled receive on lower bands

[Nathan moreschi]

I've had similar success with the same method Bob. I did it first with an IC 737, then a IC 761 and this past weekend with a IC 765.

--- On Wed, 1/4/12, BobR <brainbol at sunflower.com> wrote:


From: BobR <brainbol at sunflower.com>
Subject: Re: [ICOM] Garbled receive on lower bands
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Wednesday, January 4, 2012, 7:28 AM


Also had that problem on my 751A (bought new in 1988).  Tore into with 
intention of marking the caps and turning back and forth, as has been 
suggested in the past.  Ended up fixing without that measure by loosening 
and tightening all screws on boards (some were loose), and reseating all 
board connectors.  Has been working as original for couple of 
months.  Worth a try.

   73, Bob/WBØAUQ


At 11:40 AM 1/3/2012, you wrote:
>I have an IC-751 and IC-751A and they both exhibit this malady. >>>>>>

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html