[ICOM] Icom 271H repairman needed.

[Gary Fiber]

I had the pleasure of working with both Scott and Kuni during my time at 
Icom. Also was there when Paul at I think the Icom Service Center South 
East started servicing Icom products, he was in Georgia at that time.
Matt came after my time at Icom I think but I have worked with him at 
Dayton. It was nice to have another technical person to bounce questions 
off there when the other techs were not attending.
There are many others who are also very capable that I have fielded 
phone calls from over the years.
The nice thing about these 4 I mentioned if they think there is another 
better suited to work on a particular product they will tell you.
They used to call each other in years past and likely still do, no sense 
reinventing the wheel when another already has.
Kuni used to be a shipboard radio operator. He sure can operate CW 35 or 
40 WPM maybe faster.

Gary K8IZ



On 2/17/2012 7:57 AM, John Zantek wrote:
> http://www.w7jv.com/
>
> I think he's the best around, trained in-county by ICOM themselves,   ICOM
> on the west coast sends their stuff to HIM for repair.  The neatest part is
> that he's also an active operator, so he cares that the rig works to
> specification.
>
> 73 John K3JZ
>
>> -----Original Message-----
>> From: icom-bounces at mailman.qth.net [mailto:icom-
>> bounces at mailman.qth.net] On Behalf Of rayswan at rochester.rr.com
>> Sent: Friday, February 17, 2012 4:56 AM
>> To: Icom at mailman.qth.net
>> Subject: [ICOM] Icom 271H repairman needed.
>>
>> Hope I'm doing this right, it's my first post though long time member.
>>
>> I recently eBay'ed an Icom 271H and everything worked fine but the receive
>> audio (from the audio section) was very weak compared to my IC271h of 10
>> years ago, it would blast you out of the room.  I know about the weak caps
>> and a local guy replaced them for me but to no avail.
>>
>> Anyone have a name I can contact to get repairs started on this otherwise
>> great VHF radio?  I am near Rochester - Buffalo area but unit is packaged
> up
>> and ready to ship.
>>
>> Thanks for your time,
>>
>> Ray Swan  NV2A
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
>> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with Shipboard Radar Endorsement
Washington State Resident