[ICOM] 756 Pro3 Question

[Dave Edwards]

Chuck....I have an Icom 7600, and use a Drake L7 for hf, and a converted 
SB230 for
six.
Is this what you have in mind??
.....Dave



On 8/10/2012 3:25 PM, Chuck Sudds wrote:
> I just bought an Icom 756Pro3 and have a question for all you Icom gurus.
>
> I have two separate amplifiers that I plan to use on this rig...One for
> 6 meters only and another for HF only.  Is there any way to set up the
> amplifier keying circuits so that when I am on 6 meters it only keys up
> the 6 meter amplifier and the same when I am on HF or do I just run them
> in parallel and only power up the amplifier for the band I am currently
> operating.  I have read thru the manual but cannot see anything like
> what I propose to do.  Any help would be greatly appreciated.
>
> Thanks, in advance and 73.
>
> Chuck  KØTVD
> www.dxham.net
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>