[ICOM] IC-7600 xmit problem in RTTY/PSK

Sun Apr 29 20:01:00 EDT 2012

Got it working. Seems there were two (2) Codec's in the sound card selection
and I had selected the wrong one. (The second codec must have been a
carry-over from trying make FSK work

73  de Mike
............................................................................
.........................................................<>.................
............................................................................
...........................................................
I have a new IC-7600 and cannot XMIT in AFSK or PSK:

This must be a radio problem (setup?) as the Signallink, MixW software and
computer are all the same; only a different radio now.

(Was unable to get FSK to work/print, so stayed with AFSK)

Using AFSK I can get good print but cannot XMIT.  Using USB as required by
Signallink/MixW.

Did I miss something in setting up the IC-7600? The radio XMITs proper in CW
and SSB.

De Mike

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of icom-request at mailman.qth.net
Sent: Sunday, April 29, 2012 11:02 AM
To: icom at mailman.qth.net
Subject: Icom Digest, Vol 9, Issue 85

Send Icom mailing list submissions to
	icom at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://mailman.qth.net/mailman/listinfo/icom
or, via email, send a message with subject or body 'help' to
	icom-request at mailman.qth.net

You can reach the person managing the list at
	icom-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Icom digest..."

Today's Topics:

   1. IC-7600  xmit problem in RTTY/PSK (Mike Bragassa)
   2. Re: IC-7600  xmit problem in RTTY/PSK (jv)

----------------------------------------------------------------------

Message: 1
Date: Sun, 29 Apr 2012 08:39:09 -0500
From: "Mike Bragassa" <bragassa at consolidated.net>
Subject: [ICOM] IC-7600  xmit problem in RTTY/PSK
To: <icom at mailman.qth.net>
Message-ID: <[email protected]>
Content-Type: text/plain;	charset="us-ascii"

I have a new IC-7600 and cannot XMIT in AFSK or PSK:

This must be a radio problem (setup?) as the Signallink, MixW software and
computer are all the same; only a different radio now.

(Was unable to get FSK to work/print, so stayed with AFSK)

Using AFSK I can get good print but cannot XMIT.  Using USB as required by
Signallink/MixW.

Did I miss something in setting up the IC-7600? The radio XMITs proper in CW
and SSB.

De Mike

------------------------------

Message: 2
Date: Sun, 29 Apr 2012 11:09:55 -0400 (Eastern Daylight Time)
From: "jv" <jv at kt4u.org>
Subject: Re: [ICOM] IC-7600  xmit problem in RTTY/PSK
To: "Z Icom" <icom at mailman.qth.net>
Message-ID: <4F9D59C3.000003.07268 at STAPLES>
Content-Type: Text/Plain;  charset="iso-8859-1"

    Is USB checked in the computer's sound card on both play back and
record?

-------Original Message-------

From: Mike Bragassa
Date: 04/29/12 09:42:00
To: icom at mailman.qth.net
Subject: [ICOM] IC-7600 xmit problem in RTTY/PSK

I have a new IC-7600 and cannot XMIT in AFSK or PSK:

This must be a radio problem (setup?) as the Signallink, MixW software and
computer are all the same; only a different radio now.

(Was unable to get FSK to work/print, so stayed with AFSK)

Using AFSK I can get good print but cannot XMIT.  Using USB as required by
Signallink/MixW.

Did I miss something in setting up the IC-7600? The radio XMITs proper in CW
and SSB.

De Mike

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html

------------------------------

_______________________________________________
Icom mailing list
Icom at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/icom

End of Icom Digest, Vol 9, Issue 85
***********************************