[ICOM] IC 765 - IF Shift problem

[Maciej Wieczorek]

> When it changes from it's intended setting, are you able to correct it 
> back with
> the IF shift /PBT control?

Yes and not. I mean, the IF Shift control still works and I can correct the 
IF frequency for better sound, but the resulst is not 100% the same as on 
it's standard setting. By the way - when the IF begin to wander, it always 
goes down, to the lower frequency. That's on CW or LSB, unfortunately I 
didn't check it on USB...

73 de SP2XF
>
> At 03:59 PM 11/14/2011, you wrote:
>>I have recently purchased nice looking IC 765 on ebay. The radio works 
>>very
>>fine, actually I even prefer it to my IC 775 DXII, but there is one 
>>problem:
>>sometimes the frequency of IF SHIFT is changing itself. No matter what
>>filters or modes, SSB or CW, but obviously the worst situation is when
>>operating on CW with narrow filter.
>>
>>The radio has PBT mod and the same is happening when it's switched to PBT.
>>
>>Any idea / advise where to look, maybe someone have succesfully cured this
>>kind of problem on IC 765?
>>
>>TNX in advance!
>>73's de Mac SP2XF
>>
>>----
>>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>