[ICOM] Software for IC-703.

[Mike]

That should have been 703 or 706.

On 11/7/2011 3:15 PM, Mike wrote:
> Mike, I don't know if it will work with a '706, but take a look at ICClone at
> http://nf4l.com/ICC/ICClone.htm.
>
> 73, Mike NF4L
>
> On 11/7/2011 12:45 PM, Mike Olbrisch wrote:
>> Morning all.
>>
>> I am looking for a SIMPLE memory management program for the IC-703.  Doing
>> 706 would also be nice.
>>
>> I had something that worked on the IC-706 until about 8 months ago when a
>> computer crash took me out.  That program was one of the very few things I
>> did not have backed up.  I thought it was MM 706 or something like that, but
>> goggling didn't bring up much.
>>
>> I do not want some behemoth program that runs the rig, spots the DX and
>> makes my coffee too, just a simple memory manager.
>>
>> I don't mind paying for a good program if that is what it takes.
>>
>> Anyone got any suggestions ?  Thanks.
>>
>>
>> Vy73 - Mike - KD9KC.
>> El Paso, Texas - DM61rt.
>> W5-SOTA Association Manager.
>> W5-SOTA info: www.qsl.net/kd9kc/
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>