[ICOM] Mobile mounting bracket.

[Ray Keefe]

On 5/8/2011 4:16 PM, Mike Olbrisch wrote:
> Thank you sir.  Crossing my fingers.
>
> Doc says I need a little more exercise.  The MB-27 or MB-17 bracket was a
> special design quick-release for the IC-27/37/47 radios.  It also fits the
> Yaesu FT-817.  The FT-817 will make a wonderful bicycle-mobile radio.
> Working on that.
>
> Also looking for a suitable backpack frame to set up a /PM for hiking along
> the canals and the Rio Grande.
>
> Who says exercise can't be fun?
>
> Thanks again sir.
>
> Mike.
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Don Cunningham
> Sent: Sunday, May 08, 2011 13:56
> To: ICOM Reflector
> Subject: Re: [ICOM] Mobile mounting bracket.
>
> Mike, I'll look and see, but I think I have an old IC-27 that doesn't work
> and the bracket may be with it.  If so, it's yours for the shipping.
> 73,
> Don, WB5HAK
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
Mike,

I'm not sure what your Icom needs but I have a quick release bracket 
from a Yaesu FT690  a little 6m qrp rig, that I used to have, check the 
dimensions of that radio against what yours is, it's possible that it 
may fit.

Ray
K2RJK