[ICOM] 9-pin Accessory Plug for Older Icom VHF XCVRS

[D C *Mac* Macdonald]

Thanks a lot, Alan!
 
I have already ordered the "kit" that has two plugs
and a length of cable. Cheaper to buy the kit with
the two plugs and cable than to just buy 2 plugs!

* * * * * * * * * * *
* 73 - Mac, K2GKK/5 *
* (Since 30 Nov 53) *
* Oklahoma City, OK *
* USAF, Ret (61-81) *
* * * * * * * * * * *
 


----------------------------------------
> From: arr44 at suddenlink.net
> To: icom at mailman.qth.net
> Date: Tue, 3 May 2011 15:27:43 -0500
> Subject: Re: [ICOM] 9-pin Accessory Plug for Older Icom VHF XCVRS
>
> Mac, go to http://www.k4eaa.com/parts.htm and scroll down the page. Maybe this is
> what you are looking for.
>
> 73,
> Alan, KD5R
>
> ----- Original Message -----
> From: D C *Mac* Macdonald
> To: Icom Forum
> Sent: Tuesday, May 03, 2011 2:10 PM
> Subject: [ICOM] 9-pin Accessory Plug for Older Icom VHF XCVRS
>
>
>
> Does anybody know of a a source for these 9-pin
> plugs that fit into a 9-pin miniature tube socket?
>
> They were common on early Inoue and Icom rigs
> such as the IC-20/21/22/22S/22U/30A, etc.
>
> These rigs are simple, most are quite reliable
> and draw minimal receive/standby current.
>
> I have acquired a couple of IC-22U and plan to
> put them into service as APRS rigs.
>
> Thanks for any info you can provide.
>
> * * * * * * * * * * *
> * 73 - Mac, K2GKK/5 *
> * (Since 30 Nov 53) *
> * Oklahoma City, OK *
> * USAF, Ret (61-81) *
> * * * * * * * * * * *