[ICOM] ham radio industry

[Alan Leith]

>From this side of the Pacific, all we can do is wait and wonder.  Don't
fret over something over you have no control.  If it comes to pass that
there is a problem, deal with it then.  If you were planning to purchase a
new Japanese product, put off your purchase until the dust settles, so to
speak.  Wait until we know.  Don't lose sleep!

73

Al, VE1AL


 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Dan Cotsirilos
Sent: Wednesday, March 16, 2011 7:24 PM
To: 'ICOM Reflector'
Subject: Re: [ICOM] ham radio industry

Yaesu may be ok but does that mean there will no interruption in
transportation?





Dan K9DTC

-----Original Message----- 
From: Alan Leith
Sent: Wednesday, March 16, 2011 5:13 PM
To: 'ICOM Reflector'
Subject: Re: [ICOM] ham radio industry

Good to know.  That puts Yaesu's situation is better light.  That's far
more newsworthy than idle speculation.  Now, what about Icom and Kenwood?

73

Al, VE1AL




-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of WW3S
Sent: Wednesday, March 16, 2011 7:10 PM
To: icom at mailman.qth.net
Subject: Re: [ICOM] ham radio industry

Yaesu's plant is at Fukishima, and sustained moderate damage to one
assembly line, the word was all was well, but that was before the nuclear
plant went awry....

On 3/16/2011 6:07:56 PM, Alan Leith (aleith at syd.eastlink.ca) wrote:
> Perhaps we first need to know if any of the Japanese ham radio,
> television,
>
> electronics and automobile manufacturers are/were located in the zone
> where the earthquake struck.  I don't know and I wouldn't start
> speculating until there's been notice that there is or will be a
> problem.
>
> 73
>
> Al, VE1AL
>
>
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of Dan Cotsirilos
> Sent: Wednesday, March 16, 2011 6:52 PM
> To: icom at mailman.qth.net
> Subject: [ICOM] ham radio industry
>
> It didn't
> dawn on me until I have to order a part what effect is the Japanese
> tragedy going to have on ham radio (and the car industry for that
> matter)? It could be months or more before anything could ever be sent
> here!
>
>
> Dan K9DTC
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
> Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
> support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
> http://www.qsl.net/icom/
>

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html 

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html