[ICOM] Icom Digest, Vol 8, Issue 83 ...ICOM ??

[Ted Trostle]

Adding to Larry's comment, check that the connector pins are securely still
in place, I have seen these pins dislodge and not be making contact.

Ted, WB2LOU

On Tue, Mar 15, 2011 at 12:01 PM, <icom-request at mailman.qth.net> wrote:

> Send Icom mailing list submissions to
>        icom at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://mailman.qth.net/mailman/listinfo/icom
> or, via email, send a message with subject or body 'help' to
>        icom-request at mailman.qth.net
>
> You can reach the person managing the list at
>        icom-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Icom digest..."
>
>
> Today's Topics:
>
>   1. ??? (Gerald Bishop)
>   2. Re: ??? (Larry Young)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 14 Mar 2011 13:44:11 -0400
> From: "Gerald Bishop" <gsbishop at charter.net>
> Subject: [ICOM] ???
> To: <icom at mailman.qth.net>
> Message-ID: <034EB82D1E3846BC8D88F0276BD28982 at gb18737c25349f>
> Content-Type: text/plain;       charset="iso-8859-1"
>
> Hi- This morning while calling CQ,inoticed my IC756pro was dead. Thought
> the timer had  shut it down .Can''t seem to get it turned on again.Tried a
> diff. PS,no go- Took the cover off and checked the internal fuse.That is
> good So checked the voltage coming into the rig.I see 3.86 at best by the
> in-put torids. Is this a static voltage,till turned on? Smell nothing
> warm/hot Current on the PS meter doesn't say its drawing anything much?
> Still think the clock ?? Input with the leads off is 13.6 volts.Any ideas ?
> ATKS Jerry W8KQ
>
> ------------------------------
>
> Message: 2
> Date: Mon, 14 Mar 2011 12:24:23 -0700 (PDT)
> From: Larry Young <k4lxv at bellsouth.net>
> Subject: Re: [ICOM] ???
> To: ICOM Reflector <icom at mailman.qth.net>
> Message-ID: <500154.76055.qm at web180306.mail.gq1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Check your in line power cord fuses and insure the power connector plugged
> in the back of the rig is secure.
> Larry K4LXV
>
> --- On Mon, 3/14/11, Gerald Bishop <gsbishop at charter.net> wrote:
>
> From: Gerald Bishop <gsbishop at charter.net>
> Subject: [ICOM] ???
> To: icom at mailman.qth.net
> Date: Monday, March 14, 2011, 1:44 PM
>
> Hi- This morning while calling CQ,inoticed my IC756pro was dead. Thought
> the timer had? shut it down .Can''t seem to get it turned on again.Tried a
> diff. PS,no go- Took the cover off and checked the internal fuse.That is
> good So checked the voltage coming into the rig.I see 3.86 at best by the
> in-put torids. Is this a static voltage,till turned on? Smell nothing
> warm/hot Current on the PS meter doesn't say its drawing anything much?
> Still think the clock ?? Input with the leads off is 13.6 volts.Any ideas ?
> ATKS Jerry W8KQ
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
> ------------------------------
>
> _______________________________________________
> Icom mailing list
> Icom at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/icom
>
>
> End of Icom Digest, Vol 8, Issue 83
> ***********************************
>



-- 
You cannot change history, but you can make history!
Education is the only legal cure for stupidity.