[ICOM] ???

[Larry Young]

Check your in line power cord fuses and insure the power connector plugged in the back of the rig is secure.
Larry K4LXV

--- On Mon, 3/14/11, Gerald Bishop <gsbishop at charter.net> wrote:

From: Gerald Bishop <gsbishop at charter.net>
Subject: [ICOM] ???
To: icom at mailman.qth.net
Date: Monday, March 14, 2011, 1:44 PM

Hi- This morning while calling CQ,inoticed my IC756pro was dead. Thought the timer had  shut it down .Can''t seem to get it turned on again.Tried a diff. PS,no go- Took the cover off and checked the internal fuse.That is good So checked the voltage coming into the rig.I see 3.86 at best by the in-put torids. Is this a static voltage,till turned on? Smell nothing warm/hot Current on the PS meter doesn't say its drawing anything much? Still think the clock ?? Input with the leads off is 13.6 volts.Any ideas ? ATKS Jerry W8KQ
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html