[ICOM] IC-701 power plug

[Gary P. Fiber]

Good Find Jose,

I surely could not remember who make that connector.
There seemed to be a good connector but expensive as I remember.
This chassis mount connector shell is $9.49 from Allied Electronics.
The pins are extra beyond that.

Gary K8IZ

On 3/13/2011 5:54 AM, JMBlanco wrote:
> Hi
> Mine, the (free-hanging-plug-female) attached to IC-701PS,
> is clearly marked as AMP 206037-2. Googling for it resulted
> many links, then searched for his mating male-receptacle that
> you are looking for, and found here in Mouser:
> http://gb.mouser.com/ProductDetail/Tyco-Electronics/213581-1/?qs=yp8j7TdJNfKWXBXzGiGA2g%3d%3d
>
> Hope this helps you
> 73
> Jose
> EA7YK
>
>
>
> ----- Original Message -----
> From:<TVComlGuy at aol.com>
> To:<icom at mailman.qth.net>
> Sent: Saturday, March 12, 2011 8:41 PM
> Subject: [ICOM] IC-701 power plug
>
>
>> Good afternoon to the group.
>>
>> I picked up two IC-701's today at a swapmeet.  They are both missing  the
>> 3
>> prong power connectors.  Would anyone have these or a source for  them?
>>
>> 73//Ron, KB0WAR
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with shipboard radar endorsement
Washington State resident