[ICOM] 706 and 745

[Brian McCleary]

I'm hoping that's the case with the 706 and it wasn't over-voltaged.

With the 745 coil issue, any chance of getting some wire and winding one
yourself if you can't find one? Just an idea.

73,

Brian
N3LKA

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of icom-request at mailman.qth.net
Sent: Saturday, March 12, 2011 12:01 PM
To: icom at mailman.qth.net
Subject: Icom Digest, Vol 8, Issue 76

Send Icom mailing list submissions to
	icom at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://mailman.qth.net/mailman/listinfo/icom
or, via email, send a message with subject or body 'help' to
	icom-request at mailman.qth.net

You can reach the person managing the list at
	icom-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Icom digest..."


Today's Topics:

   1. Re: IC-706 MKII Issue (w7kna at juno.com)
   2. IC-745 part needed L22 LS266 (Pete Barnes)


----------------------------------------------------------------------

Message: 1
Date: Fri, 11 Mar 2011 23:47:37 GMT
From: "w7kna at juno.com" <w7kna at juno.com>
Subject: Re: [ICOM] IC-706 MKII Issue
To: icom at mailman.qth.net
Message-ID: <20110311.164737.24877.0 at webmail21.dca.untd.com>
Content-Type: text/plain; charset=windows-1252

Probably got that way operating into a high VSWR. Darval w7kna

---------- Original Message ----------
From: "Bubba" <n3lka at verizon.net>
To: <icom at mailman.qth.net>
Subject: [ICOM] IC-706 MKII Issue
Date: Thu, 10 Mar 2011 15:11:51 -0500

Found the issue, and it is related to shorted HF finals. Boy, when these
things go, they really go. I would like to know how they wound up that way,
this was a "Tech Special" from flea bay. Good news is the finals are
available still, bad news is, they're $36 each.

Thanks,

Brian


Message: 4
Date: Wed, 09 Mar 2011 22:24:33 -0500
From: "Brian M" <n3lka at verizon.net>
Subject: [ICOM] IC-706MKII Blown Cap
To: <icom at mailman.qth.net>
Message-ID: <002801cbded2$adcb2060$1401a8c0 at T60Setup>
Content-Type: text/plain; charset="US-ASCII"

Hello to everyone on the reflector. I just came across a 706mkii that's not
powering up. I opened it up and looked at the PA section, C82 and Q1 are
blown. My question is do you suspect a reverse polarity, bad finals, or a
just a plain cap failure. I'm hoping it's not a final issue which I still
need to desolder and test.



Just curious if anyone ever had the same failure.



Thanks,



Brian



------------------------------

_______________________________________________
Icom mailing list
Icom at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/icom


End of Icom Digest, Vol 8, Issue 74
***********************************

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
____________________________________________________________
Groupon&#8482 Official Site
1 ridiculously huge coupon a day. Get 50-90% off your city&#39;s best!
http://thirdpartyoffers.juno.com/TGL3131/4d7ab4f6b40d5f071fst03duc

------------------------------

Message: 2
Date: Fri, 11 Mar 2011 17:14:58 -0700
From: Pete Barnes <ve6rbp at gmail.com>
Subject: [ICOM] IC-745 part needed L22 LS266
To: Icom at mailman.qth.net
Message-ID:
	<AANLkTikmESf-vTQik022tUBFtK3O81Q=YZYT1yXNptTy at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi guys
 I am in need of a small rf transformer L22 for an old IC745
It's on the RF board in the NB circuit.Part# LS-266.Due to
the age Icom says no go.Wihout it the NB is rendered
useless.Any thoughts? I have emailed Scott malcom but the noise
is drivin' me nuts Thanks in advance

Pete ve6rbp at gmail.com


------------------------------

_______________________________________________
Icom mailing list
Icom at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/icom


End of Icom Digest, Vol 8, Issue 76
***********************************