[ICOM] [ICOM} IC-701 power plug

[Gary P. Fiber]

The IC-701 is over 30 years old, sold in the late 1970's and very early 
1980's. The parts people at Icom might still have connectors if they did 
not toss them out. But you are better coming at them with a part number
I doubt many at Icom America will know much of anything about the 
IC-701. The people that did have all but moved on to other things in 
life. I don't think there is any tech there that knows the rig anymore I 
can't think of anyone who did when I left in 2001.

BUT...I would ask Kuni Okuma.:  w7jv at aol.com
or Scott Malcom.:  mts at toledotel.com

If you also stumbled onto an IC-PS-701 matching power supply....Be Aware 
its a non regulated supply. its normal output is about 19 volts. All of 
the required regulation was built into the IC-701 Transceiver.
Strange way of doing it but that's the way it was done for that radio 
and power supply.

So NEVER connect the PS--701 to any rig other than the IC-701 or you 
will burn it up.

Gary K8IZ




On 3/12/2011 11:41 AM, TVComlGuy at aol.com wrote:
> Good afternoon to the group.
>
> I picked up two IC-701's today at a swapmeet.  They are both missing  the 3
> prong power connectors.  Would anyone have these or a source for  them?
>
> 73//Ron, KB0WAR
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with shipboard radar endorsement
Washington State resident