[ICOM] IC-706 MKII Issue

[Bubba]

Found the issue, and it is related to shorted HF finals. Boy, when these
things go, they really go. I would like to know how they wound up that way,
this was a "Tech Special" from flea bay. Good news is the finals are
available still, bad news is, they're $36 each.

Thanks,

Brian


Message: 4
Date: Wed, 09 Mar 2011 22:24:33 -0500
From: "Brian M" <n3lka at verizon.net>
Subject: [ICOM] IC-706MKII Blown Cap
To: <icom at mailman.qth.net>
Message-ID: <002801cbded2$adcb2060$1401a8c0 at T60Setup>
Content-Type: text/plain;	charset="US-ASCII"

Hello to everyone on the reflector. I just came across a 706mkii that's not
powering up. I opened it up and looked at the PA section, C82 and Q1 are
blown. My question is do you suspect a reverse polarity, bad finals, or a
just a plain cap failure. I'm hoping it's not a final issue which I still
need to desolder and test.

 

Just curious if anyone ever had the same failure.

 

Thanks,

 

Brian



------------------------------

_______________________________________________
Icom mailing list
Icom at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/icom


End of Icom Digest, Vol 8, Issue 74
***********************************