[ICOM] What Adhesive to remount the 761 / 765 lower lens trim
K8RI
k8ri at rogerhalstead.com
Thu Jun 23 02:42:46 EDT 2011
On 6/21/2011 7:52 PM, Dennis Kippa wrote:
> I would use GOOP, you will find it at Lowes. It is a clear adhesive and very tough.
Just a note on Goop or any adhesive in this type of installation. Apply
no more than necessary. Excess tends to cause more problems than using
insufficient.
73
Roger (K8RI)
> Dennis
>
>
>
> ________________________________
> From: "rrocket88 at netzero.net"<rrocket88 at netzero.net>
> To: icom at mailman.qth.net
> Sent: Tuesday, June 21, 2011 5:46 PM
> Subject: [ICOM] What Adhesive to remount the 761 / 765 lower lens trim
>
> My 765 Lower trim on the display lens just fell off...wound up balanced on the tuning knob and vox display knob.. well, a good time to clean up the lens, but the adhesive does not look like double sided tape.. anybody have an Idea what to use to secure it..
>
> Thanks in advance... 73 , Randy K4IMZ
>
> ____________________________________________________________
> 57 Year Old Mom Looks 27!
> Mom Reveals $5 Wrinkle Trick That Has Angered Doctors!
> http://thirdpartyoffers.netzero.net/TGL3241/4e011f83e77da1700c2st04duc
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
More information about the Icom
mailing list