[ICOM] Screws,One More Time

[Mort Arditti]

Rich and all,

Thank you for the education related to the JIS screws.  This is very 
valuable
information for any DIY type.
You mentioned Moody Tools.  I did find them and the JIS screw driver kit. I
like to buy only quality tools.  Are the Moody screw drivers high quality?
Thank  you.

73,

Mort, NA6MA


----- Original Message ----- 
From: "Rich Arthur" <w6hi22 at hughes.net>
To: <icom at mailman.qth.net>
Cc: <w6hi22 at hughes.net>
Sent: Sunday, January 02, 2011 8:08 PM
Subject: [ICOM] Screws,One More Time


>I have read lots of good ideas on Metric Screws, tnx all
>
> Yes, the screws are JIS (Japanese Industrial Standard)
> and by using the incorrect screwdriver (SAE etc) you
> will damage the screw head as it "Cams" out.
>
> Make your own screwdriver by grinding down the tip
> (point) of a SAE Phillips screwdriver...just a little.
>
> Check the Internet....Moody Tools, etc
>
> By the way...screws I'm offering...Pk of 25 @ $5.00
> shipped
>
> Terms are cash, check, Money Order
>
> Contact me offline
>
> 73
>
> Rich Arthur W6HI
> w6hi22 at hughes.net
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html