[ICOM] 756 Pro, dead on 20M, both TX/RX, all other bands ok?

[Adam Farson]

No, the Pro3 used SMT ceramic trimmers.

Cheers for now, 73,
Adam VA7OJ/AB4OJ
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Jim Vohland
Sent: 14-Feb-11 18:03
To: icom at mailman.qth.net
Subject: Re: [ICOM] 756 Pro, dead on 20M, both TX/RX, all other bands ok?


Did they use plastic trimmers in the 756 Pro?????
 
Thought they were of the older genre models; i.e. 735/745/751.....
 

 
> From: ww3s at zoominternet.net
> To: icom at mailman.qth.net
> Date: Mon, 14 Feb 2011 20:19:33 -0500
> Subject: Re: [ICOM] 756 Pro, dead on 20M, both TX/RX, all other bands ok?
> 
> I'm not familiar with this problem, what should I look for? 
> 
> 
> -----Original Message-----
> From: ma.locksmith at juno.com
> Sent: Monday, February 14, 2011 8:52 AM
> To: ww3s at zoominternet.net
> Subject: Re: [ICOM] 756 Pro, dead on 20M, both TX/RX, all other bands ok? 
> 
> Have you investigated the very common ICOM problem of a bad plastic 
> trimmer capacitor in the VCO circuits causing the VCO to stop?
> 
> Ed
> K1ZOK
> 
> On Sun, 13 Feb 2011 20:07:09 -0500 "Jamie WW3S" 
> <ww3s at zoominternet.net>
> writes:
> > whatever it is, it affects between 11-15 mhz.....below 11 is fine, 
> > and above
> > 15 is ok, but everything in between is dead...I imagine something on 
> > the filer board?
> > 
> > 
> ____________________________________________________________
> Dermatologists Hate Her
> Local Mom Reveals $5 Trick to Erase Wrinkles. Shocking Results Exposed 
> http://thirdpartyoffers.juno.com/TGL3141/4d5934294d30a2bd852st05duc
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1435/3441 - Release Date: 
> 02/13/11
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/ To support QSL/QTH.net: 
> http://www.qsl.net/donate.html
 		 	   		  
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html