[ICOM] 756 Pro, dead on 20m, both TX/RX, all other bands ok?

[Larry Young]

Jamie, check that on 20 meters you have not accidentally changed the antenna from ant1 or ant2 or vice versa.
Larry K4LXV
--- On Sun, 2/13/11, Ted Wright <n3zrx at verizon.net> wrote:

From: Ted Wright <n3zrx at verizon.net>
Subject: Re: [ICOM] 756 Pro, dead on 20m, both TX/RX, all other bands ok?
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Sunday, February 13, 2011, 10:24 AM

Try a full CPU reset
  Mine did it on ten meters once
  Ted n3zrx

Jamie WW3S wrote:
> Woke up this morning to find my 756 Pro, dead on 20m, thought it was the antennas, but they all work on the 706 just fine....and the 756 works on every other band but 20.....on 20m, it’s deaf as a post, and absolutely no TX power at all....any thoughts?
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1435/3440 - Release Date: 02/12/11
>    


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3441 - Release Date: 02/13/11

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html