[ICOM] Mast Amps for the IC-9100

John Germanos wb9pnu at charter.net
Sun Dec 11 07:32:48 EST 2011


Kent,
Couple of links below. Both manufacturers produce very good preamps.
Both manufacturers have them available for switching using just the coaxial
cable.
Both would work fine with the 9100. Not cheap though.

http://www.advancedreceiver.com/page10.html

http://www.ssbusa.com/gaasfet.html

I have an Icom AG35 420-450MHz Preamp, excess to my needs.
Just sitting on the shelf. Works fine.
If you want to start with a less expensive preamp, I would ship it to you
for $80.00.

73
John WB9PNU











-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Kent Hufford
Sent: Saturday, December 10, 2011 3:24 PM
To: ic9100 at yahoogroups.com
Cc: 'ICOM Reflector'
Subject: [ICOM] Mast Amps for the IC-9100


What would be good line amplifiers for mast mounting with M2 Eggbeaters for
2m and 440mhz?



Would like to power them thru the coax via the ICOM 9100.



thanks in advance

Kent

KQ4KK

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html



More information about the Icom mailing list