[ICOM] 735 parts radio

[Jim Vohland]

Scott is an absolute master on the older icoms. On the 735 especially he is one of a very few who can rebuild the vfo encoder. He does great work at a reasonable price. I just wish he was closer than the left coast!!!
 

> From: k2gkk at hotmail.com
> To: icom at mailman.qth.net
> Date: Thu, 18 Aug 2011 16:03:38 -0500
> Subject: Re: [ICOM] 735 parts radio
> 
> 
> >From what I have read on this group, Scott is
> especially capable on the older stuff. I have
> THREE IC-735s of my own. I need to send email
> him and see if he can work on some of my own
> older stuff that needs some attention!
> 
> * * * * * * * * * * *
> * 73 - Mac, K2GKK/5 *
> * (Since 30 Nov 53) *
> * Oklahoma City, OK *
> * USAF, Ret (61-81) *
> * * * * * * * * * * *
> 
> 
> 
> 
> 
> > Date: Thu, 18 Aug 2011 15:53:00 -0500
> > From: ewirtz at hbci.com
> > To: icom at mailman.qth.net
> > Subject: Re: [ICOM] 735 parts radio
> > 
> > On 8/18/2011 2:38 PM, D C *Mac* Macdonald wrote:
> > > Try Scott Malcolm at Malcolm Technical Services.
> > >
> > > http://www.angelfire.com/biz2/mts/
> > >
> > > There are others, but this one is widely recommended.
> > >
> > > * * * * * * * * * * *
> > > * 73 - Mac, K2GKK/5 *
> > > * (Since 30 Nov 53) *
> > > * Oklahoma City, OK *
> > > * USAF, Ret (61-81) *
> > > * * * * * * * * * * *
> > >
> > >
> > >> Date: Thu, 18 Aug 2011 11:01:35 -0500
> > >> From: ewirtz at hbci.com
> > >> To: icom at mailman.qth.net
> > >> Subject: [ICOM] 735 parts radio
> >
> > Thank you, Mac. I was beginning to think I was going to be forced to put 
> > my only modern radio to rest for ever.
> > 
> > 73,
> > 
> > Ed, KØBKA since 1955
> > X- KG1FC and VK6US (while in USAF)
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html