[ICOM] IC-706

[Hal]

Larry,
Thanks for the site - I needed some similar screws for my 706.
73,
Hal
WD4MDA

----- Original Message ----- 
From: "Larry Benko" <xxw0qe at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, September 10, 2010 1:32 AM
Subject: Re: [ICOM] IC-706


>  Dave,
>
> Go to www.mcmaster.com  and look at part #92005A116.  They are $2.30 for
> 100.  If you are really particular and must have the black oxide (which
> is Icom supplied) they are #95836A201 and are $5.87 for 50.  Buy 100 of
> the cheaper zinc plated ones, keep 10 for yourself to use and lose and
> give some out to others who have lost them.
>
> While you are looking at the McMaster Carr web site notice that they
> sell damn near every fastener in the world and have for 110 years.
> Never complain about not being able to find a screw again.  There are
> several other hardware vendors which also sell screws and I have no
> affiliation with McMaster Carr other than having ordered from them
> hundreds of times.
>
> 73,
> Larry, W0QE
>
>
>
> On 9/9/2010 10:55 PM, nagel.david at sbcglobal.net wrote:
>> I thought it was about that size but didn't know/remember. Now all we 
>> have to do is find one. Easy for Kelly in CA but not so easy in the US.
>>
>> dave
>>
>> --- On Thu, 9/9/10, Larry Benko<xxw0qe at comcast.net>  wrote:
>>
>>> From: Larry Benko<xxw0qe at comcast.net>
>>> Subject: Re: [ICOM] IC-706
>>> To: "ICOM Reflector"<icom at mailman.qth.net>
>>> Date: Thursday, September 9, 2010, 11:34 PM
>>>    3.0x0.5mm x 6mm long
>>>
>>> Same as for the IC-7000
>>>
>>> Larry, W0QE
>>>
>>> On 9/9/2010 10:02 PM, nagel.david at sbcglobal.net
>>> wrote:
>>>> Damn small and mine is missing also. If someone has
>>> the specs please post here.
>>>> Thanks
>>>> Dave W2OVP
>>>>
>>>> --- On Thu, 9/9/10, Kelly Taylor<ve4xt at mts.net>
>>> wrote:
>>>>> From: Kelly Taylor<ve4xt at mts.net>
>>>>> Subject: [ICOM] IC-706
>>>>> To: icom at mailman.qth.net
>>>>> Date: Thursday, September 9, 2010, 10:30 PM
>>>>> Hi all,
>>>>> Does anyone know the dimensions of the screw that
>>> holds the
>>>>> separation cable to the body of the radio?
>>>>>
>>>>> 73, kelly
>>>>> ve4xt
>>>>> ----
>>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>>
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3125 - Release Date: 09/09/10 
14:34:00